The “Selecting” menu tools define the object types to be selected,
or ignored. Enabling a selecting tool defines the very object type to be
selected in the model.
If a tool referent to a definite object type is not active (for
example bolts, welding, etc) then the respective object type is not possible
to be selected. The “Selecting” menu tools are a very important
and frequently used instrumentation in the TS.
Select parts ( such as columns, beams and contour plates)
Select views ( works in the model and in the drawing)
Select parts ( such as columns, beams and contour plates)
Select views ( works in the model and in the drawing)
Select surface treatments and surfaces
Select bolt groups
Select surface treatments and surfaces
Select bolt groups
Select points ( auxiliary geometry in model, not available on drawings)
Select single bolts (allows correcting bolt groups)
Select points ( auxiliary geometry in model, not available on drawings)
Select single bolts (allows correcting bolt groups)
Select construction lines, circles, arcs, and polycurves ( not available
at drawings)
Select rebar sets
Select construction lines, circles, arcs, and polycurves ( not available
at drawings)
Select rebar sets
Select reference models (mainly DWG drawings in the model) .
Select planes (used as magnetic planes)
Select reference models (mainly DWG drawings in the model) .
Select rebar groups
Select grids ( enable selecting grids as an object)
Select distances (available for drawings only)
Select grids ( enable selecting grids as an object)
Select single rebars
Select grid line (enables selecting individual grid line)
Direct modification ( allows geometry modification)
Select grid line (enables selecting individual grid line) .
Select pour breaks
Select loads
Select planes (used as magnetic planes)
Select distances (available for drawings only)
Direct modification ( allows geometry modification)
Exercise toggling with the “Select grids” tool and subsequently
selecting the grids in the model. If you can not select the grid
it means the “Select grids” tool is not active. Upon completion,
activate all the selecting tools.