The "Rebar shape catalog" allows selecting the bar group shapes from the parametric list. The tool is located at the main menu ribbon at the "Bar group" drop-down tab. Open the "Reinforcing Bar Shape Catalog".
In the "Reinforcing bar shape catalog" select the first option which stands for creating linear-shaped bar groups. Let's apply this bar group shape in the model.
Go to concrete object number four.
Approach the mouse cursor to the face marked with red. Do not press any of the mouse buttons. Let’s firstly clarify the principle for creating the bar groups when using the “Rebar shape catalog” tool.
Moving the cursor along the concrete object's face allocated the reinforcing bars perpendicularly to the face. However, it is possible to allocate the bar group in various ways. Note there is a plane highlighted with yellow and defining the final allocation of the bar group.
Upon selecting the required position of the bar group, execute a left-click,
Press the "Esc" key to disable the tool. By a double-click at the bar group, go to its "Properties" menu. Make sure that the reinforcing object created is a standard bar group. Using the "Rebar shape catalog" represents an easier way for modeling the bar group objects.
Go to the “Reinforcing Bar Shape Catalog”. All the fields represent preconfiguration options of the reinforcing bar group to be created which we have already examined in the previous chapters. Examine those fields by yourself.
The box “Length of leg” and “Bending angle” are new parameters. Set up the “Length of leg” value at 200mm and press the “Apply” button. Now let’s create a new bar group using the preconfigurations settled.
Create the bar group referring to the below:
Proceed to creating four reinforcing bar groups according to the below
Thus, the "Length of leg" parameter stands for defining the exact length of the reinforcing bar. To restore the bar length, you should empty the field but not indicate the 0 value as the software will accept it as an error.
Create the full length horizontal bars along the side faces of the concrete
Create the vertical full length bars along the side faces of the concrete
Thus we have set out the reinforcement for concrete object number four.
Go to concrete object number five.
Go to the “Reinforcing Bar Shape Catalog” and select the second
Let’s apply this shape in the model.
Pointing out the curve is done by indicating the face of the object. Thus it is possible to control the direction of the bar group, as well as the starting and the endpoint of the bars.
Thus we have finalized creating reinforcement for object number five.
G
In the “Reinforcing Bar Shape Catalog” select the following
Create the bar group defined by the option selected.
Go to concrete object number 7.
Go to "Reinforcing Bar Shape catalog". It is of no importance to investigate all the bar shape options, as applying them in the model is similar to the above.
Though the list of shapes is quite vast, just access the "Organize
To enable one of the shape options, it is necessary to add it to the "Categories
Let's create a new shapes catalog by pressing the "Create new
Let's insert the required shapes into the new catalog. Thus select a shape and, by holding to the left-mouse button pressed, drag it into the new catalog folder.
After dragging and completing the new catalog folder, press the "OK" button. Now the "New Catalog" is reflected in the "Reinforcing Bar Shape Catalog".
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
|
|
Select any shape from the catalog and apply it to the model.
Thus we have created the reinforcing bar group for concrete object number
Подробнее/Размещение арматуры - данный инструмент позволяет вставлять группы стержней однако в отличии от инструмента Группа стержней/ каталог форм арматурных стержней позволяет более наглядно отображать место вставки арматуры.
Активируем
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
В данной версии Tekla Structures инструмент “Размещение арматуры” отсутствует |
|
Выбираем форму вставляемого стержня.
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
В данной версии Tekla Structures инструмент “Размещение арматуры” отсутствует |
|
Выбираем грань в которую необходимо вставить арматуру.
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
В данной версии Tekla Structures инструмент “Размещение арматуры” отсутствует |
|
Проверяем результат.
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
В данной версии Tekla Structures инструмент “Размещение арматуры” отсутствует |
|
На этом заканчиваем редактирование образца номер 8.
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
В данной версии Tekla Structures инструмент “Размещение арматуры” отсутствует |
|
The “More” - “Rebar placing” tool works similar to the “Rebar shape catalog” and allows creating the bar groups of various shapes using a more easy-to-view rendering type.
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
The present Tekla Structure version is not available on the “ Rebar placing ” tool. |
|
Select the bar group shape.
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
The present Tekla Structure version is not available on the “ Rebar placing ” tool. |
|
Select the concrete object’s face where the bar group is to be inserted.
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
The present Tekla Structure version is not available on the “ Rebar placing ” tool. |
|
Compare your results to those presented below:
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
The present Tekla Structure version is not available on the “ Rebar placing ” tool. |
|
Thus we have created the reinforcing bar group for concrete object number
Tekla Structures v21.1 |
Tekla Structures v2021 |
|
The present Tekla Structure version is not available on the “ Rebar placing ” tool. |
|
