Structural detailing in Tekla for gas processing building
TopEngineer developed steel detailing (shop and erection drawings) for the needs of liquefied natural gas (LNG) plants. Documentation was developed for Technip company. The uniqueness of this project for our company was as follows: 1. As initial data, we were provided with a rod model with calculated sections and forces for joints. We, in turn, made the calculation of all connection for metal structures. 2.The design often changed in the project due to updated tasks from technologists. We tracked changes and adjusted drawings for steel fabricators or site workers.INFORMATION
Dimensions | 75 m x 37 m |
---|---|
Building height | 51 m |
Weight | 7 832 112 kg |
Number of parts | 122 017 |
Purpose | LNG |
Documentation | Steel detailing |
Steel detailing for the public building
Detailing of steel structures is a specialized process for issuing documentation for the manufacture of steel structures at the factory and their installation at site. Often, public buildings have complex architecture, so steel structures are indispensable. This project of the lecture building was developed by the TopEngineer team in 6 months.INFORMATION
Dimensions | 267 m x 46 m |
---|---|
Building height | 27 m |
Weight | 1 863 765 kg |
Number of parts | 48 325 |
Purpose | Public building |
Documentation | Steel detailing |
Tekla detailing for reformer furnaces
TopEngineer developed the shop and erection documentation for Steam reformer furnaces. These furnaces are designed to produce hydrogen at manufacture of chemicals such as TDI, MDI, ammonia and methanol. The project was very difficult, but we successfully completed it. The project included two mirror furnaces.INFORMATION
Dimensions | 58.3 m x 23.5 m |
---|---|
Building height | 30 m |
Weight | 768 000 kg |
Number of parts | 35 794 |
Purpose | Reformer furnaces |
Documentation | Steel detailing |
Stadium steel detailing in Tekla
A stadium is a building with a lot of people. Almost always, the roof of stadiums is made of large-span steel structures. For these designs, you need to carefully resemble the production and detailing of steel structures. All welds must be calculated and marked on detail drawings. For this project, in addition to detailing drawings, we calculated and drew installation schemes for large-span truss.INFORMATION
Dimensions | 165 m x 159 m |
---|---|
Building height | 28 m |
Weight | 4 267 555 kg |
Number of parts | 112 843 |
Purpose | Stadium |
Documentation | Steel detailing |
Precast Wall Panel detailing for the residential Building
Precast Wall Panel is the basis of prefabricated panel housing construction. The panels are manufactured at the factory and delivered to the construction site ready-made. Wall panel detailing is one of the most common and frequent industry requirements. The Topengineer has extensive experience in precast detailing. We can consider all the needs of manufacturers. In addition to drawings, we provide erection, assembly drawings, CNC files, embedment detailing, panel fixings, connections, bar bending schedules, etc.INFORMATION
Dimensions | 84 m x 62 m |
---|---|
Building height | 56 m |
Weight of rebar | 1 680 000 kg |
Weight of concrete | 99 792 000 kg |
Number of parts | 154 864 |
Purpose | Precast wall panels |
Documentation | Rebar detailing |
Precast Beam detailing in Tekla Structures
Precast beams are used in prefabricated panel housing construction. Prefabricated beams are cast and curated at the factory. TopEngineer’s team has extensive experience in detailing of precast beams. Detailing of prefabricated beams guarantees accurate dimensions, and therefore eliminates installation errors. Our engineers will perform precast detailing with the highest precision and quality standards, meeting the project deadlines.INFORMATION
Dimensions | 30 m x 16 m |
---|---|
Building height | 36 m |
Weight of rebar | 840 000 kg |
Weight of concrete | 2 100 000 kg |
Number of parts | 13 755 |
Purpose | Precast beam detailing |
Documentation | Rebar detailing |
Hollow core slab rebar and formwork detailing
Hollow core slab is an indispensable structural element in construction. Hollow core slab is lightweight and require less concrete in production. Floors and roofs are usually made from these slabs. The Topengineer offers detailing for Hollow core slab in the Tekla Structures. In addition to standard drawings and reports, we can provide control programs for rebar bending machines and formwork installation.INFORMATION
Dimensions | 29 m x 18 m |
---|---|
Building height | 53 m |
Weight of rebar | 2 400 000 kg |
Weight of concrete | 14 256 000 kg |
Number of parts | 48 714 |
Purpose | Precast Hollow Core Slab detailing |
Documentation | Rebar detailing |
Private house in Tekla structures
We are trusted to perform any kind of rebar detailing by clients around the world, including North America, Canada, Australia, Europe and the Middle East. Topengineer has established itself as a reliable partner for customers around the world. We have completed many detailing, drawing, and modeling projects for clients. We have developed a range of effective solution for the calculation and detailing of reinforced concrete private buildings to help grow your business. Our precast concrete building detailing projects ensure reliability, cost-effectiveness, and schedule.INFORMATION
Dimensions | 25 m x 26 m |
---|---|
Building height | 15 m |
Weight | 1 967 582 |
Number of parts | 16 737 |
Purpose | Private house |
Documentation | Rebar detailing |
Precast stair detailing in Tekla Structures
All buildings above one floor have stairs. Precast concrete stairs allow you to optimize and rationalize construction processes. Our team has the knowledge and experience to detail prefabricated stairs. Precast detailing can be done for single stair units as well as separate flight and landing. We have a well-established precast factory drawing process and quality assurance procedure.INFORMATION
Dimensions | 71 m x 54 m |
---|---|
Building height | 62 m |
Weight of rebar | 2 640 000 kg |
Weight of concrete | 23 760 000 kg |
Number of parts | 112 320 |
Purpose | Precast stair detailing |
Documentation | Rebar detailing |
Bridge design services
Topengineer's detailed design process includes the careful elaboration of structural steel and the configuration and calculation of connections. Using Building Information Modeling (BIM), the entire construction process can be integrated into one intelligent information model, resulting in faster construction, higher productivity, lower costs, and improved quality. Topengineer can provide detailing for railroad bridges, long span bridges, drawbridges, segmented concrete bridges, and post-stress bridges.INFORMATION
Dimensions | 111,2 m x 8,4 m |
---|---|
Building height | 16 m |
Weight | 536 155 kg |
Number of parts | 11 385 |
Purpose | Bridge detailing |
Documentation | Steel detailing |
Reinforced Concrete Modeling and Detailing
Topengineer offers the best rebar detailing solutions and rebar services under one roof, for a wide range of buildings and structures. Our experience includes small slabs, stairs and elevators, residential and commercial complexes, bridge structures and sports stadiums. We can offer a dedicated team of reinforced concrete specialists who can detail various types of reinforced concrete structures. All work is carried out under the supervision of certified civil engineers in accordance with any standard (such as AISC, TEMA, ASME, CRSI, ASTM, ACI, BS and IS).INFORMATION
Dimensions | 87 m x 28 m |
---|---|
Building height | 46 m |
Weight of rebar | 2 200 000 kg |
Weight of concrete | 20 196 000 kg |
Number of parts | 542 442 |
Purpose | Concrete modeling |
Documentation | Rebar detailing |
Art spiral stair in Tekla Structures
There are many steels design of stairs such as straight, spiral, curved, U-shaped. In this project we designed spiral stair. Calculation was made using SAP200, drawings and 3D model in Tekla Structural. As regular stairs our project contain main elements such as stringers, supporting beam, dog legs and special pans. Connection of grating to stringer, pan to stringer, stringer to dog leg, stringer to ground was calculated in IdeaStatica.INFORMATION
Dimensions | 9 m x 9 m |
---|---|
Building height | 10 m |
Weight | 9 378 kg |
Number of parts | 2 184 |
Purpose | Art spiral stair |
Documentation | Steel detailing |
Structural steel detailing for swimming pool
Our scope of work for this project consisted of documentation for steel fabricators, CNC files for machinery, erection plans, and 3D model in Tekla Structures. We delivered super quality steel detailing to steel fabricators, steel erectors and structural engineers for reliable construction. This project was carried out by a team of 8 detailers. Our engineers can make a Tekla Structures models in both metric and imperial systems.INFORMATION
Dimensions | 102 m x 72 m |
---|---|
Building height | 14 m |
Weight | 586 014kg |
Number of parts | 35 210 |
Purpose | Swimming pool |
Documentation | Steel detailing |
Shelter BIM modeling in tekla structures
TopEngineer create BIM models of any complexity for industrial and civil construction. For this shelter the approach to designing information model involves, the collection information, storage and complex processing of all architectural, design, technological, economic and other information, with all its relationships and dependencies. The Topengineer successfully completed the task of creating a BIM 3D model in Tekla Structures.INFORMATION
Dimensions | 35 m x 32 m |
---|---|
Building height | 40 m |
Weight | 31 810 |
Weight of concrete | 14 558 082 kg |
Number of parts | 27 187 |
Purpose | Shelter |
Documentation | Steel detailing |
Power plant BIM (Building Information Model) model
Building Information Modelling (BIM) in power plant. Our company has successfully completed a project for the energy sector. The main difficulty in calculating for this plant was a huge amount of equipment and loads from this equipment. With the help of the Grasshopper, we have fully automated the task of applying loads. This project was developed in one Tekla Structures model to reduce errors.INFORMATION
Dimensions | 344 m x 101 m |
---|---|
Building height | 52 m |
Weight | 8 602 780 kg |
Number of parts | 198 039 |
Purpose | Power plant |
Documentation | Steel detailing |
Pipe rack steel detailing in Tekla Structures
Pipe racks are structures for supporting pipes, cables and cable trays. Pipe racks are not buildings, they are mostly open or partially closed. Pipe racks are mainly used in petrochemical, chemical and power plants. Our company TopEngineer has extensive experience in calculating and detailing for Pipe racks. We mainly use International Building Code (IBC) (ICC, 2009), ASCE 7 (ASCE, 2006), AISC 360 (AISC, 2005b) for design. Most structural steel seismic requirements are prescribed in AISC 341 (AISC, 2005a) and AISC 358 (AISC, 2006, 2009)INFORMATION
Dimensions | 24 m x 18 m |
---|---|
Building height | 22 m |
Weight | 92 123 kg |
Number of parts | 16 752 |
Purpose | Pipe rack |
Documentation | Steel detailing |
Detailing drawings for Industrial project
TopEngineer works with any steel detailing standards be it Euro Codes or AISC or CISC, we deliver the projects as per our clients’ needs. In addition to 3D model and steel detailing drawings, the project included: BOMs and Material takeoffs, anchor setting plans, shop bolt summary, CNC data for machinery, DXF for plates, cutting drawings for hot-rolled sections.INFORMATION
Dimensions | 22 m x 8 m |
---|---|
Building height | 25 m |
Weight | 82 200 kg |
Number of parts | 15 812 |
Purpose | Shelter |
Documentation | Steel detailing |
A portal frame with variable cross-sections in Tekla Structures
Approximately 50% of building steel structures in the EU are used in the portal frame of one-story buildings. In such buildings, portal frames are the most common structural form. Portal frames are light and efficient. Steel portal frames provide a highly efficient and economical way of building. In addition, frames provide a larger usable building volume compared to trusses. Steel portal frames are great for transportation. They are relatively flexible, although the deflection of steel portal frames can be reduced, for example, by using larger steel sections or by using more bracings.INFORMATION
Dimensions | 63 m x 40 m |
---|---|
Building height | 10 m |
Weight | 172 783 kg |
Number of parts | 7 290 |
Purpose | Gym |
Documentation | Steel detailing |
Steel detailing for fitness center in Tekla Structures
For the design of a sports complex to be carried out at a high level, it is necessary that this procedure be carried out by highly qualified designers. Otherwise, the project may have many shortcomings and minor errors. Despite the small size of 76x80 meters, this fitness center is a complex structure, it contains catering, ATMs, auxiliary buildings and areas, conference rooms, rest rooms, etc. To increase inner usable volume, we used portal frame with variable cross section. All structural design was done in Tekla Structures.INFORMATION
Dimensions | 76 m x 80 m |
---|---|
Building height | 38 m |
Weight | 253 524 kg |
Number of parts | 14 544 |
Purpose | Gym with swimming pool |
Documentation | Steel detailing |
Warehouse design and steel detailing
Our company TopEngineer provides a full range of warehouse design. Our engineers have developed dozens of warehouse projects in various regions of the world. The rich experience gained in the design of warehouses is a guarantee of design quality and has a positive effect on the quality of the developed documentation and is also a guarantee of high-quality manufacturing and installation. This warehouse is designed using portal frame with variable cross section. The steel structure and foundations were made in Tekla Structures.INFORMATION
Dimensions | 123 m x 72 m |
---|---|
Building height | 10 m |
Weight | 285 351 kg |
Number of parts | 11 458 |
Purpose | Warehouse |
Documentation | Steel detailing |
Design and detailing for the production building
Our client asked us to develop a production building with an asymmetric roof. For this project, there were cramped conditions for the foundations. In addition, the client was interested in the smallest possible weight of steel structures. Our company has estimated several options. We have chosen a structure based on trasses. Trusses made it possible to perform symmetrical foundations and made it possible to reduce the weight of structures compared to portal frame with variable cross-section. Calculations were made in the SAP200, 3D model and drawings in the Tekla Structures.INFORMATION
Dimensions | 120 m x 30 m |
---|---|
Building height | 9 m |
Weight | 208 075 kg |
Number of parts | 102 214 |
Purpose | Production building |
Documentation | Steel detailing |
Steel detailing for high rise industrial buildings
This facility is designed to repair ships in the harsh northern regions. The client needed a building in which ships could be dragged for repairs. The gates in the building had to be 20 meters high. Our company TopEngineer successfully completed the project on time. We used lattice structures as columns, which made it possible to reduce the weight of the steel structure. The presence of an overhead crane and a seismological area complicated the design and calculations. The project was completed using Tekla Structures, SAP2000 and ideaStatica programs.INFORMATION
Dimensions | 102 m x 42 m |
---|---|
Building height | 22.5 m |
Weight | 620 245 kg |
Number of parts | 13 998 |
Purpose | Industrial buildings |
Documentation | Steel detailing |
BIM (building information model) for chemical factory in Tekla Structures
On this project, the client was looking for a company that could design a large complex of buildings in BIM. Our company has successfully completed these tasks. According to the 3D equipment model provided by the customer, we calculated all the structures in SAP 2000 and built a detailed 3D model in Tekla Structures. To simplify the design procedure, we have developed an album of typical connections and solutions. To speed up the design, we used Tekla-SAP2000 two-way link. As a result, the customer received a BIM model with equipment and structures.INFORMATION
Dimensions | 381 m x 275 m |
---|---|
Building height | 65 m |
Weight | 11 275 654 kg |
Number of parts | 1 651 304 |
Purpose | Chemical factory |
Documentation | BIM modeling |
Steel detailing for an agricultural building using Tekla Structures
INFORMATION
Dimensions | 85 m x 32 m |
---|---|
Building height | 22 m |
Weight | 212 019 |
Number of parts | 12 911 |
Purpose | Agricultural building |
Documentation | Steel detailing |
Bim (building information model) for gas processing factory in tekla structures
INFORMATION
Dimensions | 391 m x 273 m |
---|---|
Building height | 110 m |
Weight | 18 131 539 kg |
Number of parts | 16 173 341 |
Purpose | Gas processing factory |
Documentation | BIM modeling |
BIM (building information model) for residential complex
INFORMATION
Dimensions | 90 m x 64 m |
---|---|
Building height | 62 m |
Number of parts | 448 743 |
Purpose | Residential complex |
Documentation | Rebar detailing / BIM |
Steel detailing in Tekla Structures for the sewage plant building
INFORMATION
Dimensions | 60 m x 36 m |
---|---|
Building height | 11 m |
Weight | 31 524 kg |
Number of parts | 11 511 |
Purpose | Sewage plant |
Documentation | Steel detailing |
Steel detailing in Tekla Structures for the airport
INFORMATION
Dimensions | 332 m x 210 m |
---|---|
Building height | 31 m |
Weight | 2 546 123 kg |
Number of parts | 46 541 |
Purpose | Airport |
Documentation | Steel detailing |
Structural drawings for warehouse in Tekla Structures
INFORMATION
Dimensions | 121 m x 114 m |
---|---|
Building height | 8 m |
Weight | 609 102 kg |
Number of parts | 34 848 |
Purpose | Warehouse |
Documentation | Structural drawings |
BIM model for production building in Tekla Structures
INFORMATION
Dimensions | 65 m x 57 m |
---|---|
Building height | 27 m |
Number of parts | 75 250 |
Purpose | BIM model |
Documentation | Structural drawings |
Structural detailing services using Tekla Structures
INFORMATION
Dimensions | 414 m x 175 x |
---|---|
Building height | 14 m |
Weight | 2 246 506 kg |
Number of parts | 61 710 |
Purpose | Factory |
Documentation | Steel detailing |
Steel fabrication detailing in Tekla Structures
INFORMATION
Dimensions | 102 m x 24 m |
---|---|
Building height | 8.5 m |
Weight | 244 231 kg |
Number of parts | 25 973 |
Purpose | Production building |
Documentation | Steel detailing |
Rebar design and detailing services
INFORMATION
Dimensions | 0 |
---|---|
Building height | 0 |
Weight | 0 |
Purpose | Residential building |
Documentation | Rebar detailing |
We will call you back
It is easy to order training courses, just leave your phone number and our consultant will call you back.